top of page

Publications

Select the publication type

2021

Francesca Tosi, Mattia Pistolesi, Claudia Becchimanzi

According to a study conducted by ARS Toscana in 2014 the old people in Tuscany were 916.640 and there will be an increase of 36% in 2050. The “non-self-sufficiency” of elderly is a condition which entails their need of assistance. Often such a condition leads them to move from their home to the nursing home, radically changing their habits and everyday life. Over the past few years, robotics has represented a potential solution to improve the quality of life. This paper describes the methodology used for CloudIA research project, which concerns the development of an assistive robot to support fragile and non-self-sufficient people. An ad hoc questionnaire was developed to evaluate the acceptability. The questionnaire was addressed to 75 people, aged between 30 and 99 years, living in five nursing homes. The results allowed to target the design of the new robot.

2021

Francesca Tosi, Mattia Pistolesi, Claudia Becchimanzi

n recent years, wearable and robotic technologies are making significant advances in a variety of fields, including medicine and social and health care. The development of research in robotics marks the end of its segregation to mere industrial fields: society is increasingly open to the everyday use of safe and reliable technologies for cooperation and human assistance [1]. On this basis, the key role of designers in the development of human-centered assistive technologies is evident: technologies should be designed according to fundamental human rights and to the needs and expectations of people, supporting their independence and improving their quality of life. The scientific and methodological approaches of Human-Centred Design and Ergonomics for Design can provide a fundamental contribution in the development of technologies that embody universal ethical and socio- cultural values. This paper explores the areas of intervention and the role of design for assistive technologies, with a focus on the national state of the art. This paper also investigates the contribution of design both from a practical point of view (i.e. operational strategies and methodological approaches), and from a research perspective: it underlines the role of the designers as responsible for the dissemination of technologies aimed to support and not to replace the human work.

2021

Alessia Brischetto, Alessandra Rinaldi

BACKGROUND: one of the current challenges is improving the design of cultural heritage experiences, through the development of innovative services that foster inclusion, social innovation and intercultural dialogue. OBJECTIVE: the key mission of the cultural heritage sector today is to provide inclusive access to all groups of users, considering aspects connected to multiculture. Regard museums, for offering a satisfying experience to visitors, they have to transmit further meanings than the explanation of the exhibited artworks. The exhibition and the dissemination of cultural heritage are enjoying considerable benefits thanks to ICT. Museums are attracting the interest of researchers in the field of Interaction Design, for improving the so-called design of cultural experience and strategies to promote intercultural exchange and knowledge. METHODS: the research used the methods of design for inclusion to investigate needs of users and to explore innovative scenarios and concepts of inclusive products-services, aimed at innovating cultural heritage experience of visitors from different cultures and ages with the context of Opera del Duomo Museum in Florence. RESULTS: this paper presents an overview of the state of art in the Interaction Design context for museum experiential visits and the results of the design research conducted by University of Florence.

2021

Francesca Tosi, Claudia Becchimanzi

Made in Italy, characterised by a combination of craftsmanship, entrepreneurial skill and continuous innovation, is at the heart of many companies operating in the field of Italian manufacturing excellence. One of the challenges for Made in Italy companies, which have always been able to produce high-quality products and establish themselves on international markets, is the ability to translate their unique cultural and manufacturing heritage into design innovation. This phenomenon is even more evident in the context of reshoring, i.e. the relocation of production activities back to their country of origin by many companies, with the aim of ensuring superior product quality, better traceability and absolute competitiveness in terms of human resources and the enhancement of Italian know-how.

In this scenario, design plays a decisive role in reorienting corporate production strategies and enhancing their commitment to quality. In fact, design today represents a fundamental tool for relaunching and innovating those characteristics of quality and competitive capacity that a traditional approach is no longer able to guarantee. On this basis, the key role of the designer emerges as a professional who works both to define new products and innovate their design and development processes, and to synthesise and connect the many skills involved in these processes. This presentation aims to promote the heritage of Italian design, with particular regard to its relationship with craftsmanship, and to highlight the excellence of Italian design-oriented companies through the analysis of illustrative case studies.


Obiettivo generale è, quindi, esplorare la lunga tradizione del rapporto tra arte, artigianato e industria in Italia, anche in relazione alle più recenti esperienze di sperimentazione condotte nel nostro paese. Infatti, alle aziende italiane più note che hanno fondato da sempre il loro successo sull’eccellenza del lavoro artigiano (da Ferragamo a Ginori, da Gucci a Cassina, Alessi, Arteluce ecc.) si affiancano oggi aziende fortemente innovative, orientate alla sperimentazione di nuovi materiali, tecniche di lavorazione e innovazione tecnologica, sia dei processi produttivi che delle forme di comunicazione. ___ Made in Italy, which is marked by the synthesis of craftsmanship, entrepreneurial ability and continuous innovation, is the original core of many companies operating within the productive systems of Italian excellence. 

One of the challenges for Made in Italy companies, which have always been able to create products of the highest quality and establish themselves on international markets, is the attempt to translate a non-reproducible cultural and productive heritage into design innovation. This fact is even more evident in the light of Re-shoring (Di Stefano & Fratocchi, 2019; Barbieri et al., 2020), i.e. the re-location of production activities back to the domestic country by many companies, with the aim of achieving higher product quality, better traceability and absolute competitiveness from the point of view of human resources and enhancement of Italian know-how. 


The overall objective is therefore to explore the long tradition of the relationship between art, craftsmanship and industry in Italy, also in relation to the most recent experimental experiences conducted in our country. In fact, alongside the best-known Italian companies that have always based their success on the excellence of craftsmanship (from Ferragamo to Ginori, from Gucci to Cassina, Alessi, Arteluce, etc.), there are now highly innovative companies focused on experimenting with new materials, processing techniques and technological innovation, both in production processes and forms of communication. ___ Made in Italy, which is marked by the synthesis of craftsmanship, entrepreneurial ability and continuous innovation, is the original core of many companies operating within the productive systems of Italian excellence. One of the challenges for Made in Italy companies, which have always been able to create products of the highest quality and establish themselves on international markets, is the attempt to translate a non-reproducible cultural and productive heritage into design innovation. This fact is even more evident in the light of Re-shoring (Di Stefano & Fratocchi, 2019; Barbieri et al., 2020), i.e. the re-location of production activities back to the domestic country by many companies, with the aim of achieving higher product quality, better traceability and absolute competitiveness from the point of view of human resources and enhancement of Italian know-how.

2021

Alessia Brischetto, Kiana Kianfar

Active, meaningful, independent play is crucial for the development of health, emotional and social well-being of all children, at any age andwith different abilities. Nowadays, in the field of outdoor play equipment there is a growing attention to the needs of an increasingly wide range of users with various abilities. However, the current solutions do not meet fully inclusive requirements due to physical and social barriers limiting access, participation and play experience. Thus, interaction and socialization for childrenwith disability remain goals still far from being achieved. This article presents a line of outdoor sensory play equipment to investigate how sensorial and emotional aspects of the play, which present a fertile ground for inclusion, can be translated in design solutions by adopting Human-Centred Design approaches, such as, field observations, semi-structured interviews and focus groups together with a deep analysis concerning market worldwide.

2021

Francesca Tosi, Mattia Pistolesi, Filippo Cavallo, Laura Fiorini, Erika Rovini, Claudia Becchimanzi

This paper describes the design and development of a wearable device, able to monitor physiological data, movement and falls, for fragile older person who require health care. Some approaches of Universal Design and Human-Centred Design were used, which allowed to evaluate and design the interaction between the person and the system. From a design point of view, studies on wearability and the most appropriate landmarks of the human body were carried out, suitable for monitoring heartbeat, movement and falls. From an engineering point of view, the main challenge was the miniaturization of the electronic components for the development of a wearable device to be placed on a small surface of the body, able to allow the performance of daily activities without altering the natural movements of the user, also considering the physical limitations of older and fragile people. Our results indicate how digital technologies, specifically wearable, can be a resource to support the independence and psycho-physical well-being of old people. The next step of the research program concerns the experimentation with a significant sample of typical users (elderly and socio-health professionals), both in nursing home and at home.

  • 35
    Pagina 15
banner_dida_negativo.png
variante colore - Logo - LED - BIANCO2.png

Ergonomics & Design Lab

hosted by the Department of Architecture

as part of the Università degli Studi di Firenze

bottom of page