Publications
2014
Francesca Tosi
English translation of F. Tosi's essay "Ergonomics, Design, Design For All. From evaluation to design: the formation of a common language" in: Steffan I., "Design For All, Design for everyone. Methods, tools, applications" Maggioli, 2012, ISBN 8838761809. The essay presents the contents of the ergonomic approach in relation to Design For All, through the analysis of regulatory and research references that have progressively defined the common ground for research and experimentation. In particular, the contents of the ICF, International Classification of Functioning, Disability and Health, of the UN Convention on the Rights of Persons with Disabilities, and the regulatory tools recently produced by ISO and UNI. The methods of investigation and intervention of Ergonomics and User Centred Design represent, in this context, a theoretical and practical tool appropriate for addressing the issues of Design For All and supporting research and experimentation in this field. The essay concludes with a presentation of the most recent research and design experimentation results and possible prospects for development. English translation of the essay by F. Tosi 'Ergonomics, Design, Design For All. From assessment to design: the formation of a common language” in: Steffan I., “Design For All, Design for everyone. Methods, tools, applications” Maggioli, 2012, ISBN 8838761809. The essay presents the content of the ergonomic approach in relation to Design For All, through the analysis of normative and research references that have progressively defined the common ground of research and experimentation. In particular: the content of the ICF, International Classification of Functioning, Disability and Health, the UN Convention on the Rights of Persons with Disabilities, and the regulatory instruments recently produced by ISO and by UNI. Ergonomics and User Centred Design methods of investigation and intervention represent appropriate theoretical and applied tools to address the issues of Design For All and to support research and experimentation in this area. In conclusion, the essay presents the results of research and experimental design, as well as newer and possible development prospects.

2014
Francesca Tosi, Alessandra Rinaldi, F. Tosi; A. Rinaldi; A.Belli
The paper presents the early results of the UE-FP7 project “The Intermodal Bike”. The research aim is to provide a super-compactable, super-lightweight folding bicycle as a realistic solution to graft the cycling mode onto the root of the public or private transportation systems. The folding bikes now on the international market reach weighs between 12-15 kg, with a variable footprint but occupying -when compacted- an average volume of about 100 liters. To encourage the use of this vehicle and to extend it to a larger number of users with different characteristics, the research project has set its goal in increasing as possible compactness and light weight, creating a bicycle with a volume when compacted of 20 liters and a weight of 6 kg. max., ensuring stability and improving vehicle usability and efficiency, during the ride and in the phase of bike folding. To achieve this goal ergonomic and usability tests have been carried out. The tests allowed to find a posture that would ensure efficiency and comfort in the ride to as many users as possible. Parallel tests were made on the vehicle usability in the urban transport system and intermodal. The need for light weight has required special studies on the optimization of the vehicle's architecture and research on super-lightweight materials.

2014
Francesca Tosi
Traduzione in inglese del saggio di F. Tosi “Ergonomia e Design For All: un approccio inclusivo alla progettazione” in: Steffan I., “Design For All, Il progetto per tutti. Metodi strumenti applicazioni” Maggioli, 2012, ISBN 8838761809 Il saggio ripercorre l'evoluzione dell'approccio alla progettazione accessibile e inclusiva, a partire dalle teorie e dalle sperimentazioni del secondo dopoguerra, e il progressivo avvicinamento all'approccio dell'Ergonomia e, in particolare dello User Centred Design. Sono trattati inoltre i principali punti di convergenza tra Design For All e Ergonomia per il Design nel campo della ricerca e della sperimentazione progettuale, con riferimento alla recente evoluzione normativa in materia di usabilità. English translation of the essay by F. Tosi “Ergonomia, Design, Design For All. Dalla valutazione al progetto: la formazione di un linguaggio comune” in: Steffan I., “Design For All, Il progetto per tutti. Metodi strumenti applicazioni” Maggioli, 2012, ISBN 8838761809. The essay traces the evolution of the approach to accessible and inclusive design, starting from the theories and experiments of the second postwar period, and the progressive convergence to Ergonomics and User Centred Design approach. Are treated also the main points of convergence between Design For All and Ergonomics in Design in the field of research and experimental design, with reference to the recent standards changes regarding usability.

2014
Francesca Tosi
The article discusses the development of the models and content of training in ergonomics, through the successive stages of evolution at Italian and European level. The different training models are discussed based on the proposed content and the relationship with university degree courses. The article discusses the development of the models and content of training in ergonomics, through the successive stages of evolution at Italian and European level. The different training models are discussed based on the proposed content and the relationship with university degree courses.

2013
Francesca Tosi
The essay is the afterword to the book "Design for better life". It addresses the issue of design for the elderly in the context of research aimed at the social inclusion of the most vulnerable sections of the population. In this, as in all its areas of development, design appears to be a strategic factor capable of synthesising, in possible design solutions, on the one hand, the plurality of needs arising from the many and varied conditions that characterise the elderly and, on the other, the opportunities offered by technological innovation and the evolution of social behaviour. The objectives of the most recent interventions in favour of the elderly are, in fact, social inclusion based on the correct use of communication and assistance technologies, the guarantee of accessibility and usability of urban spaces and public and collective services, and the safeguarding and enhancement of personal autonomy. ICT technologies and the opportunities offered by assistive technology aimed at environmental control and personal safety are examined in relation to their use by older people.

2013
Francesca Tosi, Alessandra Rinaldi
The usability of medical devices is a fundamental factor in ensuring patient safety and safeguarding well-being and quality of life, and also has important implications in terms of reducing the burden of care on families and optimising the services offered by healthcare facilities. In the regulatory field, point 1 of Legislative Decree 37 of 2010 (general safety requirements) establishes the close correlation between safety requirements and 'ergonomic characteristics of the device', including in the assessment of these requirements reference to the 'environment in which the device is intended to be used' and consideration of 'the level of technical knowledge, experience, education and training, and, where appropriate, the medical and physical conditions of the users for whom the device is intended'. The ergonomic approach to design, and in particular the methods of assessing and designing the usability of products specific to User-Centred Design, are particularly appropriate in this sector, where the 'product use phase' is the main risk factor for users, and where the ease of understanding of the methods of use and the reduction of risk factors must be assessed and designed taking into account the specific difficulties and limitations of end users. The methodological approach of ergonomics, in its dual meaning of Human Factors, or the study of human factors, and User-Centred Design, is linked to the design synthesis capabilities inherent in Design and, in particular, to the ability to translate the opportunities offered by technology and the complexity of needs and expectations arising from the plurality of actors involved into innovative design solutions. Design is, in fact, a fundamental strategic factor, even in a highly technical sector such as medical devices, in order to improve the quality of products and their usability, understood as the ability to respond to the ever-changing needs and expectations of their users. The goal of design is to generate innovation, understood both as incremental or radical improvement of a product and as the creation of new meanings and languages. The role of Ergonomics for Design can therefore be summarised in its ability to propose innovative design solutions based on a structured process of assessment and interpretation of the needs (i.e. requirements, expectations and desires) of the people who actually use the product in different conditions of use and with different objectives. The presentation will outline the results of the research project Designing Usability: Criteria and Innovative Solutions in the Medical Device Sector, launched on an experimental basis as part of the Master's Degree Course in Design at the University of Florence, in collaboration with SIFO (Italian Society of Hospital Pharmacists) and SIE (Italian Society of Ergonomics). The research and design experimentation experience, conducted on the theme of blood glucose meters and kits for diabetics, and on other types of devices, will be described through: the evaluation methods used; the results achieved through the experimental survey conducted with users; the criteria for setting up and developing the preliminary analysis phase, and the subsequent phases of defining and developing the design concepts.

- 35Pagina 32
