Publications
2013
Francesca Tosi, Alessandra Rinaldi, Alessandro Belli
The article presents the initial results of the EU-FP7 project "The Intermodal Bike". The research aimed to design a super-compact folding bicycle as a solution to further embed cycling within the urban transport system, both public and private. Folding bicycles currently available on the international market weigh between 12 and 15 kg and take up a minimum of approximately 100 litres of space when folded. To encourage the use of this means of transport and extend it to a larger number of users with different characteristics, the research project set itself the goal of increasing compactness and lightness as much as possible, creating a bicycle with a footprint of 30 litres when compacted and a weight of 6 kg max. max., ensuring stability and efficiency and improving usability, both when pedalling and in the folding and transport system once closed. To achieve this goal, ergonomics and usability tests were carried out on the vehicle, which made it possible to identify a posture that would guarantee efficiency and comfort when pedalling for the majority of users. This posture was defined within an acceptable range of joint angles (torso angle, shoulder angle, elbow angle, wrist angle, lower limbs, etc.). At the same time, tests were carried out on the usability of the vehicle in an urban context and on intermodal transport systems. Finally, the factor of lightness required specific studies on the optimisation of the vehicle's architecture, in particular the frame, and research into super-light materials. The work starts from the idea that the synergy between the use of bicycles and public transport (trains, trams, underground, urban and extra-urban buses) or private transport (taxis, cars) could lead to an increase in the share of both modes of transport in all urban and suburban journeys. The bicycle is a minimal, non-motorised or partially motorised vehicle, capable of handling small individual movements very efficiently in the context of short journeys, typical of widespread urban mobility. However, it loses its 'appeal' over long commuting distances for a number of reasons. The intermodal use of bicycles with public or private transport, which are more efficient over medium or long distances, could enhance the strengths of each mode. The intermodal folding bicycle could constitute a "third pillar" of incentives for cycling in urban mobility (one of the EU's priorities in all its publications on urban mobility), together with the other two more established instruments at the "policy level" (modal incentives and bans) and the "infrastructure level" (parking facilities, cycle paths). Together with bike sharing, intermodal bicycles, particularly folding ones, are among the integrated measures and strategies for addressing urban transport issues and challenges. European directives on air quality and noise require specific actions in urban areas. Improving the urban integration of bicycles, making them interact with other modes of transport, will not only have an impact on the environmental situation, but will also improve accessibility to urban centres, with the prospect of improving their liveability.

2012
Alessia Brischetto
Ergonomics for Design, on the one hand, allows the project to be geared towards the real needs and expectations of contemporary users and to define new usage scenarios, starting from the research methods typical of traditional Ergonomics or Human Factors, and User-Centred Design. Design for Sustainability, on the other hand, thanks to criteria for predicting the environmental impact of products, directs design not only towards the rationalisation of the materials used for production, but above all towards reducing consumption and the environmental impact of products during use, favouring both the use of low-consumption technologies and renewable energy production, and solutions capable of guiding and raising awareness among domestic users on these issues.

2012
Alessia Brischetto
The essay presents the contents of the ergonomic approach in relation to Design For All, through the analysis of regulatory and research references that have progressively defined the common ground for research and experimentation. In particular, the contents of the ICF, International Classification of Functioning, Disability and Health, of the UN Convention on the Rights of Persons with Disabilities, and the regulatory tools recently produced by ISO and UNI. In this context, the methods of investigation and intervention used in ergonomics and user-centred design represent a theoretical and practical tool that is appropriate for addressing the issues of Design For All and supporting research and experimentation in this field. The essay concludes by presenting the latest research and design experimentation results and possible prospects for development.

2012
Alessia Brischetto
Ergonomics for Design, on the one hand, allows the project to be geared towards the real needs and expectations of contemporary users and to define new usage scenarios, starting from the research methods typical of traditional Ergonomics or Human Factors, and User-Centred Design. Design for Sustainability, on the other hand, thanks to criteria for predicting the environmental impact of products, directs design not only towards the rationalisation of the materials used for production, but above all towards reducing consumption and the environmental impact of products during use, favouring both the use of low-consumption technologies and renewable energy production, and solutions capable of guiding and raising awareness among domestic users on these issues.

2012
Francesca Tosi, Alessandra Rinaldi, Alessandro Belli, Grazia Tucci
The paper presents the early results of the UE-FP7 project “The Intermodal Bike”. The research aim is to provide a super-compactable, super-lightweight folding bicycle as a realistic solution to graft the cycling mode onto the root of the public or private transportation systems. The folding bikes now on the international market reach weighs between 12-15 kg, with a variable footprint but occupying -when compacted- an average volume of about 100 liters. To encourage the use of this vehicle and to extend it to a larger number of users with different characteristics, the research project has set its goal in increasing as possible compactness and light weight, creating a bicycle with a volume when compacted of 20 liters (reduction factor =5), with a shape of 48 x 36 x 12 cm and a weight of 5 kg. max., ensuring stability and improving vehicle usability and efficiency, during the ride and in the phase of bike folding. To achieve this goal ergonomic and usability tests have been carried out. The tests allowed to find a posture that would ensure efficiency and comfort in the ride to as many users as possible. Parallel tests were made on the vehicle usability in the urban transport system and intermodal. The need for light weight has required special studies on the optimization of the vehicle's architecture and research on super-lightweight materials.

2012
Francesca Tosi, Alessandra Rinaldi
The article expands on the presentation given by the authors at the International Ergonomics Association (IEA) Congress, held in Recife, Brazil, from 13 to 16 February 2012. Abstract: The changes in society at the beginning of this millennium are giving rise to deep transformations in the behavioural trends and tastes of home users, as well as in their lifestyles and consumption patterns. This opens up a wide range of opportunities for innovation within the context of contemporary home design. Due to the emergence of new user profiles, new needs and models are coming to the attention of designers and manufacturing companies. Just think about the new needs resulting from the changing composition of households, new forms of cohabitation and the contemporary multi-ethnic society.

- 35Pagina 33
